John Baasch Augers & Flighting
114 N. Custer Ave
Grand Island, Nebraska   68803    
 Phone   308.382.9071        Fax    308.382.3553

   Helicoid Flighting

Helicoid Flighting is a cold rolling of a special chemistry strip steel into a continuous helix. This
produces a work hardened finished Flighting surface. Helicoid flighting is a superior product,
as the steel is work hardened in this process. The Flighting is then normally fastened to the pipe
by intermittent welds. They may be welded on one or both sides. The pipe has seamless
internal collars to accommodate the shafts. Helicoid and Sectional Flighting of the same diameter
and shaft size are interchangeable.

• Sizes: 3" thru 16" Outside Diameter  * Thickness:  1/8, 3/16, 1/4, 5/16, 3/8, 7/16
  
• Pitches: Standard, Short and Long  *Right or Left hand available
  
• Made to CEMA specifications or to your own custom order
  
• Available mounted or unmounted

Copyright © 2003  John Baasch Auger

Back To Home Page